La Ingeniería, una profesión de impacto. Memorias del IV Simposio Virtual de Investigación Aplicada a la Ingeniería de Procesos
Palabras clave:
Ingeniería, profesión, impactoSinopsis
Referencias bibliográficas
Ahn, J.S., Castle, L., Clarke, D.B., Lloyd, A.S., Philo, M.R. & Speck, D.R. (2002). Verification of the findings of acrylamide in heated foods. Food Addit. Contam. 19, 1116–1124.
AIS. (2010). Reglamento colombiano de Construcción Sismo Resistente NSR-10. Bogotá: AIS.
Alex, J., Ogurek, M., Schütze, M. (2013). A novel simulation platform to test WWTP control options. 11th IWA Conference on Instrumentation, Control and Automation (ICA). 18-20. Narbonne, Francia.
Aranguren, L. M. A., & Sepúlveda, D. F. B. (2013). Biopolímeros: una alternativa para la elaboración de empaques agroindustriales. I+ D Revista De Investigaciones, 1(1).
Arce-Villalobos, O. (1993). Fundamentals of the design of bamboo structures. Doctoral dissertation. Eindhoven: Eindhoven University of Technology.
Bach, P. M., Rauch, W., Mikkelsen, P. S., McCarthy, D. T., Deletic, A. (2014) A critical review of integrated urban water modelling – Urban drainage and beyond. Environmental Modelling and Software, 54, 88-107.
Barros, A. (2001). Modelos multinivel: primeros pasos. Departamento de Medicina Social de la Facultad de Medicina de la Universidad Federal de Pelotas, Rio de Janeiro, Brasil.
Becalski, A., Lau, B.P., Lewis, D. & Seaman, S. (2003). Acrylamide in foods: Occurrence, sources and modelling. J. Agric. Food Chem. 51, 802–808.
Benitez, C. (2017). Comportamiento mecánico de culmos de Guadua angustifolia ajsutados con abrazaderas metálicas. Cali: Universidad del Valle.
Bersinger, T., Hécho, I., Bareille, G. & Pigot, T. (2015). Assessment of erosion and sedimentation dynamic in a combined sewer network using online turbidity monitoring. Water Science & Technology, 72(8), 1375-1382.
Biedermann, M., Biedermann-Brem, S., Noti, A., Grob, K., Egli, P. & Mändli, H. (2002). Two GC- MS methods for the Analysis of Acrylamide in Foods. Mitt. Lebensm. Hyg 93, 638–652.
Bologna, L.S., Andrawes, F.F., Barvenik, F.W., Lentz, R.D. & Sojka, R.E.J. (1999). Analysis of residual acrylamide in field crops. Chrom. Sci 37, 240–244.
Box, G. E. P. & Draper, N. R. (1987). Empirical Model Building and Response Surfaces, New York: John Wiley & Sons.
Bråthen, E., Kita, A., Knutsen, S.H., Wicklund, T. (2005). J. Agric. Food Chem. 53, 3259- 3262.
Bravo, E. (1997). Biotecnología: una visión andino-amazónica. Ecología política, 14, 143.
Camacho, V. y Páez, I. (2002). Estudio de conexiones en guadua solicitadas a momento flector. Bogotá: Universidad Nacional de Colombia.
Castillo, R. et al. (2015). Bioplástico a partir de la cascara de plátano. Revista de Iniciación Científica, 1, 34-37.
Castle, L. (1993). Determination of acrylamide monomer in mushrooms grown on polyacrylamide gel. J. Agric. Food Chem. 41, 1261–1263.
Cruz, R., Martinez, Y. y López, A. (2013). Biopolímeros y su integración con polímeros convencionales como alternativa de empaque de alimentos. Puebla, México: Universidad de las Américas Puebla. Departamento de Ingeniería Química, Alimentos y ambiental.
Dhillon, R. & Wuehlisch, G. (2013). Mitigation of global warming through renewable biomass. Biomass and bioenergy, 75-89.
Dochain, D. & Vanrolleghem, P. (2001). Dynamical Modelling and Estimation in Wastewater Treatment Processes. London: IWA Publishing.
Fishman, G. S. (1978). Conceptos y métodos en la simulación digital de eventos discretos. México: Limusa.
Flores-Gorosquera, E., García-Suárez, F. J., Flores-Huicochea, E., Núñez-Santiago, M. C., González-Soto, R. A., y Bello-Pérez, L. A. (2004). Rendimiento del proceso de extracción de almidón a partir de frutos de plátano (Musa paradisiaca). Estudio en planta piloto. Acta Científica Venezolana, 55(1), 86-90.
García, J., Rangel, C. & Ghavami, K. (2012). Experiments with rings to determine the anisotropoc elastic constants of bamboo. Construction and building of materials, 52-57.
Gaviria, J. y Castro, M. (2005). Modelos Jerárquicos Lineales. Madrid.
Ghavami, K. & Marinho, A. (2005). Propiedades físicas e mecánicas do colmo inteiro do bambu da espécie Guadua angustifólia. Revista Brasileira de Engenharia Agrícola e Ambiental, 107-114.
Ghavami, K. & Moreira, L. (1996). Development of a new joint for bamboo space structures. Transactions on the Built Environment, 3-12.
Golstein, H. (2003). Multilvel Statiscal Models. Hodder Arnold.
Henze, M., Gujer, W., Mino T. & van Loosdrecht, M. C. M. (2000). Activated sludge models ASM1, ASM2, ASM2d and ASM3. London: IWA Publishing.
Hossain, M., Islam, M. & Numan, S. (2015). Multipurpose Uses of Bamboo Plants: A review. International REsearch Journal of Biological Sciences, 57-60.
Ingesam y Emcali (2013) Informe de Caracterización de Vertimientos finales de Cali. INGESAM-EMCALI E.I.C.E. E.S.P. Cali, Colombia
Janssen, J. (2000). Designing and building with bamboo. Inbar, Technical report No. 20. Eindhoven, Netherlands: INBAR.
Kern, D. (1965). Procesos de tranferencia de calor. Primera edición.
Kreft, I., De Leeeuw, J. y Kim, K.S. (s.f.). Comparing Four Statistical Packeges for Hierarchical linear regression. CA UoCP.
Langergraber, G., Alex, J., Weissenbacher, N., Woerner, D., Ahnert, M., Frehmann, T., Halft, N., Hobus, I., Plattes, M., Spering, V. & Winkler, S. (2008). Generation of diurnal variation for dynamic simulation. Water Science and Technology, 59(9), 1483-1486.
Laroque, P. (2007). Design of a low cost bamboo footbridge. Master Thesis. Massachusets: Massachusets Institute of Technology.
Loaiza, C. A. (s.f.). SURA. Recuperado de www.sura.com/blogs/autos/como-funcionan-frenos.aspx#sthash.1MKSN18t.dpuf
Lopachin, R.M. & Lehning, E.J. (1994). Acrylamide induced distal axon degeneration. A proposed mechanism of action. Neurotoxicology 15, 247–260.
Low, M. Y., Koutsidis, G., Parker, J., Elmore, Dodson, A. & Mottram, D. (2006). Effect of citric acid and glycine addition on acrylamide and flavor in a potato model system. J. Agric. Food Chem. 52, 7011-7016.
Luque, P. y Álvarez, D. (2003). Investigación de Accidentes de Tráfico Estudio del Automóvil. Universidad de Oviedo.
Masson, L., Romero, N., Castro, J. & Robert, P. (2005). Informe de avance Proyecto HEATOX 506820. Vvageningen, Holanda.
Mazzeo, M.M., León, L., Mejía, L.F., Guerrero, M.L.E. y Botero, L.J.D. (2010). Aprovechamiento industrial de residuos de cosecha y poscosecha del plátano en el departamento de Caldas. Revista Educación en Ingeniería, 9, 128-139.
Mecánica del Automóvil. (s.f.). Recuperado de http://www.almuro.net/sitios/Mecanica
Milliken, W. F. & Milliken, D. L. (1995) Race Car Vehicle Dynamics. Society of Automotive Engineers, Inc.
Morán, R., Benítez, C., Silva, H. & García, J. (2016). Desing of steel connector for structural bamboo members. AMDM 2016 Terce Congreso Internacional Sobre Tecnologías Avanzadas de Mecatrónica, Diseño y Manufactura (pág. 12). Cali: Universidad del Valle.
Morán, R., Muñoz, J., Silva, H. y García, J. (2016). Conexiones resistentes a momento para culmos de Guadua angustifolia. VI Simposio Internacional del Bambú y la Guadua. Bogotá.
Morán, R., Weeb, K., Harries, K., & García, J. (2017). Edge bearing tests to assess the influence of radial gradation on the transverse behavior of bamboo. Construction and Building Materials, 574- 584.
Muschalla, D., Schütze, M., Schroeder, K., Bach, M., Blumensaat, F., Gruber, G., Klepiszewski, K., Pabst, M., Pressl, A., Schindler, N., Solvi, A.-M., Wiese, J. (2009). The HSG procedure for modelling integrated urban wastewater systems, Water Science and Technology, 60, 8, 2065-2075.
Nuñez, R. (s.f.). Sistemas de un automóvil. Recuperado de http://es.slideshare.net/bogarth07/sistemas-de-un-automovil
Ramírez, O., Silva, J.P. & Schütze, M. (2016). Alternativas para la gestión integral del agua en Cali. AGUA 2016. Cali, Colombia.
Resource, A. (2007). Creative Commons License. 30/ 03 /2016 17:45. Recuperado de 1http://ocwus.us.es/arquitecturaeingenieria/operacionesbasicas/contenidos1/tema2/pagina_03.htm
Robledo, J. (1993). Un siglo de bahareque en el antiguo Caldas. Texas: Ancora Editores.
Robledo, J. (1996). La ciudad en la colonización Antioqueña: Manizales. Bogotá: Universidad Nacional de Colombia.
Rodríguez, J. P., McIntyre, Díaz-Granados, M., Achleitner, S., Hochedlinger & M., Maksimović, C. (2013). Generating time-series of dry weather loads to sewers. Environmental Modelling and Software, 43, 133-143.
Rojas, K., Galvis, A. & Schütze, M. (2016a). Simulación del efecto de la acumulación y re-suspensión de sedimentos en sistemas de drenaje. Caso de estudio: Sistema de Drenaje Sur (Cali); 1er Seminario Internacional Centros Urbanos Sostenibles y Resilientes. Congreso ACODAL. Cali, 27 – 29 Octubre 2016.
Rojas, K., Galvis, A. & Schütze, M. (2016b). Sedimentos en sistemas de drenaje – ¿Cómo modelarlos? Seminario Internacional “Gestión del uso eficiente y ahorro de agua para la sostenibilidad del recurso” en el evento AGUA 2016. Cali, 08. – 11 Noviembre 2016.
Rubin, H. M. (s.f.). Simulación de eventos discretos. Instituto Tecnológico de Tepic.
Ruiz, G. (2006). Obtención y caracterización de un polímero biodegradable a partir de la yuca. Ingeniería y Ciencia. 24, 5-28.
Salas, D. (2006). Actualidad y futuro de la arquitectura de bambú en Colombia. Tesis de doctorado. Barcelona: Universidad Politécnica de Cataluña.
Schütze, M. (ed.) (2015). LiWa Transferability Manual - How can LiWa be applied to other regions of the world? Magdeburg: Project LiWa – Lima Water; ifak e. V. Magdeburg, con contribuciones de todos los socios del proyecto. Recuperado de: http://www.lima-water.de/documents/liwa_transferabilityreport.pdf
Schütze, M., Butler, D. & Beck, M.B. (2002). Modelling, Simulation and Control of Urban Wastewater Systems. London: Springer.
Schütze, M., Pabst, M. & Peikert, D. (2013). Enfrentando el riesgo: Modelamiento y Control de redes de alcantarillado: el caso de Hildesheim/Alemania; Agua2013; Seminario Internacional: Manejo del riesgo de agua; Cali, 16-18 Octubre 2013.
Schütze, M., Reussner, F. & Alex, J. (2011). SWQM - A simple river water quality model for assessment of urban wastewater discharges. 12th International Conference on Urban Drainage. Porto Alegre, 11. – 16.09.2011.
Shannon, R. E. (1988). Simulación de Sistemas: Diseño, desarrollo e implementación. México: Trillas.
Söderstrom, T. & Stoica, P. (1989). System identification. New York: Prentice Hall.
Vahanvati, M. (2015). The Challenge of connecting bamboo. 10th World Bamboo Congress, (págs. 1-11). Damyang.
Valero, V. et al. (2013). Biopolímeros: Avances y propuestas. DYNA, 80(181), 172.
Van der Lugt, P., Van den Dobbelsteen, A., & Janssen, J. (2006). An environmental, economics and practial assessment of bamboo as a building material for supporting structures. Construction and Building Materials, 648-656.
Vélez, C., Alfonso, L., Sánchez, A., Galvis, A y Sepúlveda, G. (2014). Centinela: an early warning system for the water quality of the Cauca River. Journal of Hydroinformatics, 16(6), 1409-1424. DOI: 10.2166/hydro.2014.127
Vélez, C., Galvis, A., Ramírez, A. & Baena, L. (2006). Cauca river water quality model hydroinformatics application in a developing country. 7th International Conference on Hydroinformatics. HIC 2006. Nice, Francia.
Vengala, J., Mohanthy, B., & S, R. (2015). Sesismic performance of bamboo housing - an overview. 10 th Wold Bamboo Congress Korea, (págs. 1-17). Damyang.
Villegas, L., Moran, R., & García, J. (2015). A new joint to assemble light structures of bamboo slats. Construction and Building Materials, 61-68
Descargas
Descargas
Publicado
Colección
Categorías
Licencia
Esta obra está bajo una licencia internacional Creative Commons Atribución-NoComercial-CompartirIgual 4.0.